Tag Archives: Kyrocera

Solar power

Aquatic Park Sailing Club has a mooring field, not docks, and the Club House itself is solar powered so our situation necessitates some thought into electricity generation and conservation. This is fine, as I love being independent of the plug.

I opted to install two solar panels, big solar panels, on my Hunter 340. They fit perfectly on top of the bimini, and provide as much power as you can squeeze out of a solar panel. The panels are Kyrocera 270w each running at 24v with a MorningStar MMPT charger. I am pleased with the installation as they are pretty inconspicuous, hovering about an inch an a half above the bimini. I have since replaced the old 12v batteries with two sets of 6v batteries.

Performance

IMG_0050_meter_30A
Yes, that is 30 amps of solar power!

In terms of performance, the panels are great. Even on overcast days I have more electricity than I can store. During the day the batteries don’t dip, so the only cycling that happens is from evening usage for the fridge/stereo and lights. I am adding some LED strip lighting from Ikea, which should help reduce the impact from the Halogen bulbs. With something like 14 lights I don’t think it makes financial sense to swap out the bulbs for LED, besides, we never turn them on all at once.

There is some boom shading on the forward panel. I have the panels on separate breakers so I should check to see the performance impact from the shade. Two panels of this wattage is overkill but the panels were not that expensive and I figured if one is good, two would be great!

Installation

The panels were installed for the 2014 season and I spent last year on the old batteries. Spring 2015 I upgraded the batteries to 4 x 6volt, paired in two, with a set in starboard and port lazarettes.

I did the installation myself, anchored one end of the panels to the arch and the other end to a rail that runs parallel to the bimini. This arrangement creates a bit of spring on the rail end but I’m not concerned. Ideally I could run a pole to the rear railing and perhaps tab the front one to the bimini railing. I cut small wedges out of starboard keep the mounting square.

solar-diagram_actual_2

Slight alteration to the wiring configuration, one battery switch vs three.


I’ll keep chipping away at this post, apologies if it is a bit brief.