In my quest to boat at a reasonable cost (go ahead, call me frugal, thrifty or just plain cheap – I can take it). I present my latest effort at circumventing the outrageous prices charged for all things with the word boat on the label. I used to think motorcycle parts were exorbitant! I guess what really kills me is most of what I see is either re-purposed from other normal uses, or isn’t any better then regular, non-boat stuff, despite the manufacturers claims. Perhaps this is because boats are expensive and your life is on the line if equipment fails, if you are offshore I suppose. So there is definitely a fear involved in DIY or home based solutions, the undercurrent is “You don’t want to ruin your boat/cruise/investment with the wrong widget/paint/wax/rope!”
Last year I priced out a professional Bimini, as a blond I fry under the sun, my fair children won’t do any better in the sun, coverage we need. I was shocked to get quotes that were almost two thirds the price of what I paid for the boat. What? This brought me to Sailrite and their yummy looking kits and machines, alas, they still seemed to be expensive to my cheap eye. The key to choosing a machine for sail repair and heavy work is a walking foot. A walking foot is an additional foot on the top that moves the material from the top and bottom simultaneously, thereby avoiding material slippage. You also need a machine that can go through heavy material, and mulitple layers of that material. Sailcloth is one of the toughest materials around, this machine uses industrial #20 needles and heavy weight thread.
I decided that there must be a cheaper alternative to the $899 walking foot sewing machine. A little digging with the help of Mr.Google revealed that the same machine is out there marketed under different names. I went for the “Rex” from Sewman for $375, had it shipped to my father-in-law in the US who brought it up to Toronto, duty free. ahh, now that’s more like it. It is just sewing machine in a cardboard box, no case. I could buy the Sailrite Deluxe Carrying Case for $125+ shipping+ taxes & duty, or just make one; so I made one as pictured below.
I am not knocking the Sailrite products, they have taken the time to research, assemble and importantly, support their products, if money were no option I would just order theirs, but then again, if money were no option, I wouldn’t be sewing my own Bimini on my 30 year old boat.
The quality of the machine seems fine for what it is, a semi industrial heavy weight machine; this isn’t my mothers Pfaff. The casting is a bit rough and the cheapo plastic rheostat foot pedal was a pice of junk. I replaced it with a standard plug so I can use any standard foot pedal. (I bought one at my local surplus shop for $12, or can use my nice Foredom pedal). I also found a spool of black nylon thread there too!
My first project is a tether for my two year old. She likes to move around the boat and this summer with a second baby, we will have our hands full so a tether, or lifeline is a must. I looked at the Sailrite kit for $87, seems pretty straight forward, but the price!!!! To be fair they are using some magical carbiners that are very expensive. I sourced my clips from MEC the Canadian version or REI. If a carbiner is good enough to fall off a mountain side, I think it is good enough to keep me on my boat, the most expensive clip there is $22. I looked around on the net and it seems Whichard carbiners are expensive – but do you really need a stainless clip capable of lifting your whole boat for a haul out? I await the blogisphere to enlighten me.
Here is the breakdown:
- 1/8″ Shockcord, 1 meter $0.80
- 1″ tublar webbing, 1 meter $1.30
- two 1″ D-rings $0.50
- 2 carbiner clips, $6.40
- Total $10.17
The observant might not that the clips say “not load bearing” this clip is for my 21lb daughter, if I need a better clip as she gets heavier I can upgrade to a fancy $20 clip! My sewing may not be as clean as the professional ones, but for a saving of $70 I think I can live with it.
Stay tuned for more sewing projects.