I’m a big believer in details, perhaps it’s my training as a goldsmith or a pixel perfect developer, but if there’s a speck or a design flaw it will bug me. Having a white boat is a lesson in finding serenity, I swear there is someone out there laughing at all the scrubbing boat owners do.
Having a brand new high-pressure water pump with a faulty shut-off sensor (the backstory) gave me the perfect opportunity to fashion a wash-down pump. A bit of hose, a few clips and away we go!
With 40 psi and 17 liters/min the cleaning possibilities are endless!
The fridge door/lid always made a screech when opened and the gas strut was very stiff. I found a bunch of gas struts on the sale table at Princess Auto for $4 each and they seem to be close to the right size. I only noticed when I removed the old one that there is a manufacture’s sticker and model number.
I only noticed the brackets were not in the same plane when I put on the new strut. I relocated the brackets to get the door to shut, but also the bottom bracket needed to come over by 3/4″ to line up.
The bottom bush was drilled out to fit on the existing stainless post and luckily the top fitting works!
UPDATE: Fall 2017
The cheapo strut didn’t last the season so I splurged on a new strut (It was only $13 !) I choose one from Amazon based on the weight of the lid. Here are the specs:
- Load : 170N ( 17Kg)
- Hole Diameter : 4mm / 0.16″
- Rod Size : 172 x 6mm / 6.8″ x 0.24″
- Hole Distance : 408mm / 16″
- Total Size : 430 x 15mm / 17″ x 0.6″ (L*D)
After a full summer of cruising here are my thoughts.
- The piston rod is a bit on the thin side but it doesn’t bend, in the future I might get one thicker but I don’t think it really matters.
- the ends have plastic caps like automotive ends, they do snap onto the stainless mounts and only fell off once or twice if I really impacted the strut. It did come ball-end mounting hardware, but I thought I would try it and it seems to work. I could drill out the plastic caps and fit the circlips if falling off was an issue.
- the struts lift is stronger than either of the two, it takes some effort to close and I had to put on two latches to keep it closed (which is how it came from the factory in the first place.