wheel wrap

Last summer on the return trip from Ottawa/Kingston, the weather was particularly cold in early August.  Malcolm and I got seriously cold, numb feet and stiff hands. I noticed that the stainless wheel gets really cold in cool weather,  I never had this problem with a wooden tiller, but a cold wheel makes life that much more miserable.

I decided to wrap my wheel in the leftover marine grade vinyl I used for the cushions on my previous sailboat, the Tanzer.  I used just a small amount of contact cement to hold it in place.The thread is UV nylon I used for the cover, not that I am worried about the elements as the cockpit is covered by the bimini (and solar panels).  It took me about three hours to stitch. I cut the vinyl a little too narrow and the seam varies from closed to about a 2mm gap. The perfectionist in me says it can wait until it needs to be replaced, or I’m retired, whichever comes first!

Leave a Reply

Your email address will not be published. Required fields are marked *